Model RES1 Wind Technology Package

Description

Future Tek has designed this package to fully equip your Wind Technology Lab. Below are the trainers included in this package and the areas of study that they cover (as with all Future Tek Trainers, comprehensive, hands-on lab manuals are included).

Features

  1. Mechanical Training
    • Model 3001 Belt Drive/Chain Drive
      • Identify Belt and Chain Drive Components
      • Install and Adjust Belt and Chain Drive
      • Calculate Drive Ratio and Sprocket Size
      • Hands on "Real World" Job Sheets
      Future Tek, Inc.
      Model 3001 Belt Drive Trainer

      Future Tek, Inc.
      Model 3002 Chain Drive Trainer

    • Model 3003 Shaft/Coupling Alignment
      • Measure/Correct a Soft Foot Condition
      • Measure for Shaft Runout
      • Determine Bar Sag
      • Use Straight Edges, Feeler Gauges, and Two Dial Indicators to Perform an Alignment Procedure
      • Use a Graph to Perform an Alignment Procedure
      • Use Two Dials to Perform a Reverse Dial Alignment Procedure
      Future Tek, Inc.

    • Model 3004 Bearing Maintenance
      • Bearing Identification and Mounting
      Future Tek, Inc.
      Model 3004 Bearing MaintenanceTrainer

      Future Tek, Inc.
      Model 3004 Bearing MaintenanceTrainer

  2. Programmable Logic Controllers
    • PLC – Many Models to Choose From
      • File structure and addressing schemes
      • Communications Setup
      • Uploading and Opening an Existing Project
      • Creating and Downloading a Project
      • Output Latch/Unlatch, Branch, TON/TOF Timer, Up/Down Counter, Compare, Sequencer, and Bit Shift Instructions
      • Modifying Rungs
      • Using Search and Force Functions
      • Monitoring Data Table Files
      • Troubleshooting
    • Powerflex 40 – Available on Many Models
      • Monitoring Display Group Parameters
      • Entering Motor Nameplate Data
      • Changing Parameters/Keypad Control
      • Changing From Keypad Control to “3-Wire” Control
      • Simulating A Jog Command
      • Changing Accel and Decel Time
      • Changing Ramp, Coast, and DC Brake Stop Modes
      • PLC 0-10Vdc Analog Control
      • Troubleshooting
        • Future Tek, Inc.
        Model 1236 Suitcase PLC Trainer with PowerFlex 40 and Motor

  3. Industrial Motor Controls
    • Start/Stop Station and Two Start/Stop Stations Used to Control a Magnetic Starter
    • Starting/Stopping in Forward/Reverse
    • Hand/Off/Auto Control Circuit Using a Limit Switch/Float Switch
    • Time Delay On/Off Using a Control Relay
    • Combining Time Delay On/Off
    • Start/Stop Using a Control Relay and Pilot Light Indicators
    • Two Start/Stop for Sequence Control Start/Stop/Jog Control Circuit
    • Photo Switch/Proximity Switch
    • Add-Ons Available
      • Future Tek, Inc.
      Model 7000 Motor Controls Package

  4. Hydraulics
    • Familiarization (Flow, Pressure caused by restriction)
    • Cylinder Circuits (Directional Control, Speed Control, Force Control, Series , Parallel, Regenerative, and Sequence Circuit)
    • Hydraulic Motor Circuits (Directional Control with and without Check Valve, Speed Control)
    • Also Available: PLC Add-on, Large Mobile Hydraulic Trainer
      • Future Tek, Inc.
      Model 9503 Level I Hydraulic Trainer

  5. Troubleshooting
    • Model 7100 Motor Controls Troubleshooting
      • Computer Emulates Each Circuit (Three Wire Control, Multiple Station Control, Reversing Starter Control, Compelling Sequence Control, Sequence Control), Voltage, and Resistance
      • Evaluates Troubleshooting Logic (Student Makes Decision To: Test Circuit Operation/Take Measurements, Replace Component or Connection, Declare the Problem Corrected, Abort the Problem, Quit Session)
      • Instructor or Computer/Randomly Generated Faults
      • Generates Progress Report Showing Each Step Taken to Resolve the Problem
      • 152 Faults to Choose From
        • Future Tek, Inc.
        Model 7100 Industrial Controls Troubleshooting Trainer

        Future Tek, Inc.
        Model 7100 Industrial Controls Troubleshooting Trainer

    • Model 7100-P1 PLC Troubleshooting
      • Same Concept as the Model 7100 with Added PLC Troubleshooting Component including Ladder Logic
      • 51 Insertable Faults
        • Future Tek, Inc.
        Model 7100-P1 Motor Control/PLC Troubleshooting Trainer

        Future Tek, Inc.
        Model 7100-P1 Motor Control/PLC Troubleshooting Trainer

        Future Tek, Inc.
        Model 7100-P1 Motor Control/PLC Troubleshooting Trainer